Motor installation: U type 2. Spindle head type: ER25 3.The maximum speed: 6600r / min 4. Motor box configuration direction: the top of the front Product roundness is less than 0.008mm. Description: The power milling head is a universal power component that is combined with a milling table or a power slide to complement various types of support components to form a combined milling machine in various forms. It is suitable for the processing of steel, cast iron and non-ferrous materials. It can be used for drilling, tapping, milling, boring, etc. It is used in various special machinery manufacturing. The spindle head adopts the labyrinth waterproof structure design, which effectively avoids the. 370W MT3 ER25 ER25 Spindle Unit Power Milling Head 6600rpm CNC Drill Waterproof. The Maximum Speed: 6600r / Min. Motor Box Configuration Direction: the Top of the Front. Product Roundness Is less than 0.008mm.
The Power Milling Head Is a Universal Power Component That Is Combined with a Milling Table or a Power Slide to Complement Various Types of Support Components to Form a Combined Milling Machine in Various Forms. It Is Suitable for the Processing of Steel, Cast Iron and Non-ferrous Materials.It Can Be Used for Drilling, Tapping, Milling, Boring, Etc. It Is Used in Various Special Machinery Manufacturing.
The Spindle Head Adopts the Labyrinth Waterproof Structure Design, Which Effectively Avoids the Cutting Fluid and Dust Entering the Spindle During the Production Process, Ensuring the Service Life and Accuracy of the Spindle Head. The Main Shaft Box Is Made of High-tough Cast Iron. It Is Treated by Artificial and Natural Double Aging, Wear-resistant and Not Easy to Deform. The Main Shaft Is Made of 40cr High-quality Alloy Steel. The Bearing Is Assembled with the Deep Groove Ball Bearings Produced by Luoyan Technology in the First 3 and the Rear 2, and Is Lubricated with High-speed Bearing Grease.The Product's Roundness Is less than 0.008mm and the Maximum Speed Is 6600 Rpm. The Spindle Head Adopts ER25 Taper Hole to Directly Clamp the Drill Bit and Milling Cutter, Which Facilitates the Clamping Function and Expands the Clamping Range (2-16mm), Which Makes the Power Head Further Improve the Processing Precision of the Product. This Boring and Milling Power Head Can Be Combined with the Motor Unit to Form a U-shaped Power Boring and Milling Head or a Z-shaped Power Boring and Milling Head.
The Motor Box Can Be Placed in the Direction of the Front Left Side 90°/Front Mounted Right Side 90 °, After the Left Side 90 ° / Rear Right Side 90 °, down Front / down Rear, in the Boring, Milling, Drilling, Attack, Twisting and Other Cutting Functions to Play Its Unique Advantages. Feedback is very important to us.It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it's non-workdays, please kindly be patient and wait till Monday. This item is in the category "Business & Industrial\Industrial Automation & Motion Controls\Electric Motors\General Purpose Motors". The seller is "atyokado" and is located in this country: US.
This item can be shipped to United States.