400w ER11 12000RPM BLDC spindle motor&PWM MACH3 Driver&switch power supply kit

400w ER11 12000RPM BLDC spindle motor&PWM MACH3 Driver controller&switch power supply&mount bracket CNC DIY kits. This spindle motor kits is widely used in CNC DIY engraving machine, drilling machine, grinding machine; processing PCB, acrylic foam, etc. 1pcs 400w DC brushless spindle motor with 1pcs ER11 Nut 1pcs 3.175mm collet ; If you need other size collet, please contact with us.

1pcs PWM MACH3 speed controller for DC spindle motor. 1pcs 48V 400W switch power supply. 1pcs mount bracket spindle holder.

400w Brushless DC spindle motor. 1, the default potentiometer, can be directly through the rotary potentiometer. 2, analog control, VR voltage signal input terminal, GND grounding (voltage range 0-5V) (Note: after the control of the potentiometer removed, the external voltage signal control to take effect).

3, can use connected PWM signal input control, PWM input requirements: level 3.5-12V VPP, frequency 1K-10KHZ applicable to Mach3 spindle speed control, (Note: remove potentiometer control, external signal voltage control to take effect). (2) motor run / stop control (EN). 1, control terminal EN relative to the GND can control the stop and operation of the motor.

EN pin suspended motor operation, when the motor is connected with the GND terminal when the motor is stopped. (3) motor forward / reverse control (F/R).

1, control the F/R and +5V can control the direction of the operation. When F/R and +5V are not connected, the motor runs counter clockwise, and vice versa. Input voltage: 50/60HZ AC110/220V, can be switched, global universal. Output power: power 400W with temperature control cooling fan. The items are ALL BRAND NEW.

All products have been checked and packaged in good condition before dispatch. You have 14 days to return the items from the date they were received.