50W Dental Electric Micromotor 50000rpm Brushless Grinding Machine Nail Drill

50W Dental Electric Micromotor 50000rpm Brushless Grinding Machine Nail Drill. Voltage 220V/50HZ, 110V /60HZ Collet 2.35mm, 3.0mm, 3.175mm Speed 0-50000rpm Torque 8N/cm Positive reversal+Adjustavle speed Max. Precautions: 1 When the handle is used, the handle should not be idling and the grinding pin must be installed 2 When installing the grinding head, the rod of the grinding head must be cleaned and cleaned and then loaded into the chuck 3 Don't let water in when you are using the handpiece otherwise the handpiece will be rust It must clean the water out and make it dry then continue to use if water go into to handpiece 4 The use of the foot seitch must be turned off the host power otherwise it will affect the performance of the host circuit 5 Don't hit or make it fall down, expecially the handle 6It is strictly forbideen to refuel the bearings.

The sale of this item may be subject to regulation by the U. Food and Drug Administration and state and local regulatory agencies. EUB (under 2KG): Only for USA, Canada, and Australia. China Post (under 2 KG): 25-55 days.

Few states need to pay remote surcharge. Don't worry, I will tell you before you pay if it's need. Your SATISFACTION is our ultimate goal.

We work hard to earn your trust and future business. A Please check the package first before you sign for the package.

B If you have a defective item, you can return it or ask for a discount. Or replace item for you. We are factory founded dental equipment Wholesaler and Retailer. If you have any questions about our service or products.

You will be replied within 24 hours(48 hours in the weekend).