6KW Square Air Cooled Spindle Motor CNC Milling Machine 18000rpm 220V ER32

6KW Square Air Cooled Spindle Motor CNC Milling Machine 18000rpm 220V ER32
6KW Square Air Cooled Spindle Motor CNC Milling Machine 18000rpm 220V ER32
6KW Square Air Cooled Spindle Motor CNC Milling Machine 18000rpm 220V ER32
6KW Square Air Cooled Spindle Motor CNC Milling Machine 18000rpm 220V ER32
6KW Square Air Cooled Spindle Motor CNC Milling Machine 18000rpm 220V ER32
6KW Square Air Cooled Spindle Motor CNC Milling Machine 18000rpm 220V ER32
6KW Square Air Cooled Spindle Motor CNC Milling Machine 18000rpm 220V ER32
6KW Square Air Cooled Spindle Motor CNC Milling Machine 18000rpm 220V ER32
6KW Square Air Cooled Spindle Motor CNC Milling Machine 18000rpm 220V ER32
6KW Square Air Cooled Spindle Motor CNC Milling Machine 18000rpm 220V ER32
6KW Square Air Cooled Spindle Motor CNC Milling Machine 18000rpm 220V ER32
6KW Square Air Cooled Spindle Motor CNC Milling Machine 18000rpm 220V ER32
6KW Square Air Cooled Spindle Motor CNC Milling Machine 18000rpm 220V ER32
6KW Square Air Cooled Spindle Motor CNC Milling Machine 18000rpm 220V ER32
6KW Square Air Cooled Spindle Motor CNC Milling Machine 18000rpm 220V ER32
6KW Square Air Cooled Spindle Motor CNC Milling Machine 18000rpm 220V ER32
6KW Square Air Cooled Spindle Motor CNC Milling Machine 18000rpm 220V ER32
6KW Square Air Cooled Spindle Motor CNC Milling Machine 18000rpm 220V ER32

6KW Square Air Cooled Spindle Motor CNC Milling Machine 18000rpm 220V ER32

Spindle Motor 220V 6KW(Flanged). 17.7"8.3"7.9(45cm21cm20cm).

32.4LB(14.7kg)/33.7LB(15.3kg). NOTE: Spindle motor must be equipped with frequency converter. Set up frequency converter correctly according to machine requirement. The item is not included frequency converter. Through the inverter to adjust the output voltage and frequency can be achieved 0-18000 stepless.

High precision bearing and pure copper coil, high machining accuracy, long service life. Pure aluminum body, anti-oxidation and anti-corrosion, lighter weight. Adopt precision steel ball holder to ensure spindle rotation accuracy in high speed grinding. Lubricating grease resistant to high temperature of 200? Must match the drive spindle chosen correctly according to the electric spindle nameplate good debugging power, voltage and frequency.

Set the frequency converter should be set command channel, and then set the display channel, and finally set the parameters. When setting parameters, be sure that the reference frequency, the frequency of the three highest rated frequency and consistency. The spindle is generally clockwise in the wrong direction, the drive can change settings or swap any two rotating wire the inverter output UVW terminal on. In general, water-cooled spindle surface temperature and ambient temperature greater than 20 degrees, the heat can be considered a spindle; when air-cooled spindle surface temperature greater than ambient temperature of 30 degrees, can be identified as the main heat seriously, immediately shut down cooling, a check. You can make order with no worry. Any concern just feel free to let us know, we'll reply in 24 hours in normal condition. Orders are processed from Monday-Friday; Not on the weekends & public holidays. We will work with you to get the case resolved in the fastest method. Please contact with us at first for more details.

If product was received damaged or not as described, please send us some pictures or videos, so we could well understand your problem, then solve them for you ASAP. Besides, it's much helpful for us to claim with UPS, remind our related department to pay much more attention to packaging later on. If an item is received damaged, customer service must be contacted within 7 days of receiving your item.

Payments via eCheck do not clear immediately. Usually you will wait 5-7 days after checkout for it to clear.


6KW Square Air Cooled Spindle Motor CNC Milling Machine 18000rpm 220V ER32


Motor Rpm Drilling  Sitemap  Contact Us  Privacy Policy  Terms of Use