Dental Lab Micro Motor N3 N8 35K 45KRPM Micromotor Handpiece Polisher BURS SA

Dental Lab Micro Motor N3 N8 35K 45KRPM Micromotor Handpiece Polisher BURS SA
Dental Lab Micro Motor N3 N8 35K 45KRPM Micromotor Handpiece Polisher BURS SA
Dental Lab Micro Motor N3 N8 35K 45KRPM Micromotor Handpiece Polisher BURS SA
Dental Lab Micro Motor N3 N8 35K 45KRPM Micromotor Handpiece Polisher BURS SA
Dental Lab Micro Motor N3 N8 35K 45KRPM Micromotor Handpiece Polisher BURS SA

Dental Lab Micro Motor N3 N8 35K 45KRPM Micromotor Handpiece Polisher BURS SA

Dental Lab Micro Motor N3 N8 35K 45KRPM Micromotor Handpiece Polisher BURS. Dental Lab Steel Carbide Burs for Polishing Teeth Drill Handpiece 2.35mm.

Fit for Dental Handpiece with 3/32 inch collect. The main features of carbide rotary burs. It can be used in processing all kinds of metals(it involved all kinds of Hardened Steel)and nonmetal(such as marble, Jade, bone). The hardness of the workpiece is up to. The small, short-handled grinding wheel can be replaced by it in most part of work without dust pollution. It has high processing quality , high polishing, and can processing various shapes moulds with high precision. It has long service life, 10 times longer than the high speed steel cutter, 200 times longer than the durability of the small grinding wheel. It is not only easy to master, use, but also safe and reliable. Labor intensity can be reduced, and better the working environment. High economic efficiency, and comprehensive processing cost Can be reduced 10 times around. Carbide rotary burrs are usually driven by hand-held electric, or wind-energy tools (also available on machine tools). The tool must be clamped rightly when using. It is better to choose reverse milling as cutting type to avoid reciprocating cutting. The work should be to avoid the chip flying.

Please wear the protective glasses to avoid scraps flying-out when you are working. Set of 10 pcs in one plastic box.

Micro motor DENTAL Handpiece is an instrument made with motor and used for working with the turning force. From the revolving motor up to 35000rpm. And it is applied to cutting, grinding, polishing.

Burs according to the material and working way are available. The products are mainly used for dental laboratory.

The use range has been expanded gradually for Jewelry, Nail, Engraving, orthopedics. Industry market, beauty wood carving, egg carving etc.

Portable Design-it is very convenient to use and take Installed special ball bearings for super high speed (So do not need add oil). 2.35,000 RPM's provides higher speeds, greater torque. Newly designed front nose with 2 heavy duty front bearings. Newly designed dust seal protection. Newly designed cooling fan and air flow.

Speed range: 0-35,000 R. Micro motor machine is an instrument made with motor to use like the pencil and used for working with the turning force from the revolving motor up to 50000rpm.

The use of various burs according to the material and working way are available. The products are mainly used for dental laboratory and dental clinic. The use range has been expanded gradually for Jewelry, Nail, Engraving, orthopedics, Industry market, beauty wood carving, egg carving etc.

Compact sized control box 2. Very High-powered and quality 0-50,000rpm. (twists the handle counter-clock wise to change the bur and can be easily restored back to the original position) 5.

(it's well designed to output from zero to 50,000rpm by using non stage speed system) 6. Right & Left turning ability. (Variable Control system using foot) 8. Installed special ball bearings for super high speed.

(less heat and noise) 9. Dust seal protection for excellent durability.

0 - 50,000 R. (a)220V/50Hz±10% (b)110V/60Hz±10% Weight.................................. Foot Control system 1 PC. Micromotor machine is an instrument made with motor to use like the pencil and used for working with the turning force from the revolving motor up to 45000rpm.

Micromotor handpiece is an instrument made with motor to use like the pencil and used for working with the turning force from the revolving motor up to 45000rpm. To avoid the problem of speed loose control and maintain long lifespan of this machine, please do turn the speed to "min" with the speed controller before start the following operation : push "on"or"off" button, Switching bur running between clockwise and reversed or Switching control between manual and foot pedal. Compact sized control box with precise small & strong micro motor handpiece.

Very High-powered and quality 0-45,000rpm. Non stage speed system (it's well designed to output from zero to 50,000rpm by using non stage speed system).

Foot ON/OFF switch system (Variable Control system using foot). Installed special ball bearings for super high speed(less heat and noise).

Newly designed for superior performance And very easy to use. 45,000 rpm's provides higher speed, greater torque. Speed range 0­ - 45,000 R.

1 On/Off Switch Foot Pedal. Portable Design (Connectors to your Power Control unit for Dental Lab Polishing). Installed special ball bearings for super high speed (Do not need add oil).

Compact sized control box with precise small and strong micromotor handpiece. Very High-powered and quality 0-35,000rpm Made in Korea. Another virture is non stage speed system(it's well designed to output from 0--- 35,000rpm by using non stage speed system). Burs size :2.35 mm.

Micromotor N3+Electric Motor+Contra Angle+Straight Handpiece. Attention: please remember to make the speed controller zero when switch on or off the machine and when you do Reversible Switching. Very High-powered and quality 0-35,000rpm. (twist the handle counter-clock wise to change the bur and can be easily restored back to the original position). Non stage speed system(it is well designed to output from zero to 35,000rpm by using non stage speed system).

Foot ON/OFF switch system (the pedal only a switch, not can be control the speed). Made of iron, more durable. Compatible with 2.35mm burs.

Speed range 0 - 35,000 R. The handle can rotate 90 degrees to change the bur. Tracking info of your parcel is available. The following form is for your reference.

IMPORTANT INFORMATION ON OUR POLICY AND FEEDBACK. Feedback if you are satisfied with our items. We try to be fair and accurate with all of our product listings and descriptions. If there is a problem, we can work together to resolve it. We strive to always be extremely fair and always try to work with reasonable customers.

We will always make every attempt possible to resolve issues if we made a mistake. Please do not assume a mistake is intentional. Let us know if our service could be better! Please repack the item carefully.
Dental Lab Micro Motor N3 N8 35K 45KRPM Micromotor Handpiece Polisher BURS SA


Motor Rpm Drilling  Sitemap  Contact Us  Privacy Policy  Terms of Use