LPKF Protomat C60 Mill/Drill Unit Circuit Board Plotter, High-Speed Motor

LPKF Protomat C60 Mill/Drill Unit Circuit Board Plotter, High-Speed Motor, For tight specs and diverse applications. Used in Clean, Excellent working condition.

The 60,000 rpm programmable speed motor of the ProtoMat C60 allows the use of an extended range of tools, including small rectangular profiled endmills with diameters as small as 0.25 mm (10 mil). These tools have superior characteristics for RF and microwave applications, and allow maximum precision with minimum penetration into the substrate.

The high-speed motor also allows the production of dense digital designs with track and gap geometries of 100 µm (4 mil) and 0.2 mm (8 mil) drill holes, as well as multilayer applications. Compact and easy to use.

Spans entry-level to advanced models. Semi-automatic tool change 3 (75 mm) thick cast aluminum table top.

Excellent for producing high-quality PCBs. The LPKF ProtoMat C-Series plotters range from compact to high-performance models. If you need a compact plotter to use in a school, college, or university, or a more advanced system for producing RF, microwave, and multilayer boards, the ProtoMat C-Series has a system that will suit your needs.

ProtoMat C60 is an ideal system for producing superior quality circuit boards. Minimum track width: 4 mil (0.1 mm). Minimum insulation width: 8 mil (0.2 mm).

Minimum drill hole size: 13.4" x 7.8" (340 mm x 200 mm). Working area: 0.312 mil (7.937 µm). Resolution: ± 0.2 mil (5 µm).

Repeatability : ± 0.8 mil (20 µm). Precision of front-to-back alignment: 3-phase motor, 10,000 - 60,000 rpm, programmable.

Tool change: 1/8 quick-release collet. Tool collet: 90 holes per minute. Drilling speed: 1.38 per second (35 mm per second). Travel speed (max): mechanical scanning, coaxial foot.

Depth adjustment: stepper motors; precision lead screws, ActiveCAM anti-backlash Supernuts. X/Y positioning system: precision linear bushings and dual shafts. X/Y linear system Z drive: electromagnetic with hydraulic damper. Machine table base: 3 (75 mm) cast aluminum. Dimensions (W / H / D): 16.5" x 13.4" x 22.25 (420 x 340 x 565 mm). Weight: 53 lb (24 kg). Power supply: 120/240V, 50 - 60 Hz/200VA.